Axle problems can derail your journey, but not when you're with Hex 6 Diesel Services in Tyler, TX. Our dedicated axle repair services ensure your heavy-duty vehicle remains a relentless force on the road.
How Long Can You Drive With a Worn Axle?
Driving with a worn axle is a risk that should be avoided where possible. Typically, you can drive for a short period of time, but it's crucial to address the issue immediately to prevent further damage and ensure your safety on the road.
Signs of Axle Failure
Understanding the signs of axle failure is crucial to preventing further damage to your heavy-duty truck. Be on the lookout for the following:
Vibration During Driving: If you notice unusual vibrations, especially at high speeds or during turns, it might indicate an axle problem.
Strange Noises: Clicking, clunking, or rumbling sounds coming from the axle area are common indicators of wear or damage.
Leaking Grease: Visible grease on the inside edge of your tires or along the underside of the vehicle could signify a broken axle boot, leading to axle wear.
Vehicle Pulling to One Side: If your truck is pulling to one side while driving, it could be due to an axle issue affecting wheel alignment.
Difficulty Steering: A failing axle can make steering more challenging, especially during turns.
Visible Damage to Axle Components: Regular inspections can reveal cracks, bends, or rust on the axle shaft, indicating a need for repair.
Wheel Area Movement: Excessive movement or wobble in the wheel area can be a sign of a compromised axle.
Axle Repair Shop in Tyler, TX
Hex 6 Diesel Services in Tyler, TX, is your go-to destination for heavy-duty axle repairs. Our team of experts is equipped to handle a wide range of axle issues, ensuring your vehicle operates safely and efficiently.
If you're in need of axle repairs, don't hesitate to get in touch with us at Hex 6 Diesel Services. We're committed to providing top-notch service to keep your heavy-duty vehicles in prime condition.
Types of Vehicles We Work On
Our highly skilled team is also able to carry out axle repairs on a range of on- and off-highway vehicles, including:
- Oil and gas industry equipment
- Agriculture equipment
- Municipality vehicles
- Heavy equipment
- Commercial on-highway trucks, trailers and tankers
- RVs and buses
- Diesel trucks
FAQs
Why Is Gear Oil Leaking From My Truck’s Axle Housing?
Axle oil leaks can develop around seals, gaskets, hubs, or damaged housing surfaces. Even a small leak can lower lubricant levels over time, increasing heat and wear inside the axle assembly. Finding the source early helps protect bearings, gears, and other internal components from lubrication-related damage.
What Causes a Truck Axle Seal to Keep Leaking After Replacement?
A replacement seal can fail again if the sealing surface is worn, the shaft has excessive movement, the vent is restricted, or the seal was damaged during installation. Repeated axle seal leaks usually require inspection beyond the seal itself to determine what is causing pressure or movement inside the assembly.
How Do You Know if a Heavy-Duty Truck Axle Bearing Is Failing?
Axle bearing problems may cause humming, grinding, excessive heat, vibration, or noticeable movement at the wheel end. A technician can check bearing condition, lubricant contamination, end play, and operating temperature to determine whether the bearing is worn or another axle component is creating the symptom.
What Causes Excessive Play in a Commercial Truck Axle?
Excessive axle play can develop from worn bearings, damaged splines, loose hardware, improper adjustment, or internal differential wear. Measuring movement at the wheel end and inspecting the axle assembly helps pinpoint where the looseness originates before it damages surrounding gears, seals, or hubs.
How Do You Get to Hex 6 in Tyler?
Truck and equipment owners heading to Hex 6 for axle repair can find the shop at 5406 FM 850, Tyler, TX 75705. The northeast Tyler location can be reached through major roads connecting the city with FM 850. Traffic arriving from I-20 can use US-271 south toward Tyler before taking local roads toward FM 850. Drivers starting in central Tyler can follow Loop 323 to US-271 and continue northeast toward the shop area.
Take the connecting roads to FM 850 and continue toward Hex 6. A Shell gas station nearby can serve as a reference point as you get closer. Hollywood Door of Tyler is another nearby business drivers may notice while traveling through the area.
Areas Also Serve For Axle Repairs in Texas
As well as Tyler, TX, we also proudly bring our axle repair service to the following surrounding areas, Longview, TX, Kilgore, TX, Jacksonville, TX, Henderson, TX, Athens, TX, Palestine, TX, Sulphur Springs, TX, Marshall, TX, Nacogdoches, TX, Lufkin, TX, Corsicana, TX, Dallas, TX, Plano, TX, Garland, TX, Mesquite, TX, Terrell, TX, Greenville, TX, Mount Pleasant, TX, and Paris, TX.
